Be sure to understand the operation method before stirring the loader.

Be sure to understand the operation method before stirring the loader.
1 Before mixing the loader, place the mixer handle in the “stop” position.
2. After starting the engine, the mixer should be rotated at low speed for about 10 minutes to allow the hydraulic oil temperature to rise above 20C to work.
3. When the mixed concrete is shipped, the speed of the mixer is 2-10 rpm.
4. Time cannot be too long. On the way to transport concrete, the mixer should not stop for a long time to prevent segregation of concrete. Drivers should always observe the concrete situation.
5. When there is concrete, the stagnation time at the site shall not exceed 1 hour. If the timeout is exceeded, the person in charge of the site shall be required to promptly handle it.